First, routine maintenance
1, check the internal sump oil level, provisions should be added to the lack of engraved lines.
2, check the cooling water.
3 , fastening securely connected to the inspection of the engine and ancillary devices.
4 , keep the engine clean , and make necessary scrub.
5 , troubleshooting and irregularities discovered .
6 ,Turbocharger Kits when the ambient temperature is below 5 degrees Celsius , parking, do you want to put the cooling water (no antifreeze time ) .
Second, the level of care on the basis of day care, add the following entry:
1, check the fan belt tightness, and adjust if necessary.
2 , cleaning oil filter and fuel filter .
3 , replacing the paper filter dust on the air filter, if the filter is clogged or the oil filter black smoke damaged and should be replaced.
4 , the water pump bearings, generator bearings , couplings jet pump bearings, starter motor bearings filling 3 # industrial lithium grease ( available calcium complex grease grease instead of sodium or calcium , referral to appropriate maintenance intervals shortening ) .
5 ,H beam Connecting Rods for maintenance work and demolition of parts during reassembly must be clean , and ensure the correct position, and then start the engine , observe the operating conditions, exclude the existence of three leakage failures and irregularities .
留言列表
